Sistema de refrigeración ChipBLASTER J-30

  • 30 liters per minute (2 to 16 gpm)

  • Pressure up to 83 bar (1200 psi)

  • Ideal for machine tools up to 15 kw(20 hp)

  • 480, 900 and 1800 liter tank options let you create "mini" central systems
CONTACTO Tel: +49 (0) 611 5101990 Correo electrónico:
  Añadir a favoritos

Standard configuration

The ChipBLASTER J-30 is fed by a transfer pump that draws from the machine tool sump, through the filter vessel to the integral 380 liter clean tank. When the machine tool calls for coolant, the filter pump(s) draws the coolant from the ChipBLASTER tank and pumps through to the inlet of the positive displacement pump. The coolant then flows at high pressure through a series of distribution and safety valves and on to the machine tool.

Machine connection

ChipBLASTER systems are designed for using standard plug configurations. Our standard interface cables utilize these connections on both ChipBLASTER unit and machine tool sides. We are able to also supply female connector sockets for wiring on the customer’s machine tool side. In addition, we approve and supply customer specific interfaces, as required (with extra cost).

Nuevos(as) ChipBLASTER J-30

Datos técnicos
Potencia del motor [kW]3.75
Coolant Flow (Fixed flow)30 l/min.
Pressure (manuel / set for safety)83 bar / 70 bar
Coolant Outlet1 x Ø12.7mm, L = 4.5 m
Feed InletØ25,0 mm, L = 4.5 m
Filtration - Single Bag-Sytle filter, degree of purity 5µm (water) 10µm (oil)
Integrated Tank "Clean Tank"380 l
Tank Overflow HoseØ51,0 mm, L = 4.5
Transfer Pump - Standard transfer pump, w/ standpipe assembly
Interface - 1 x 12-pin Power Cable; 1 x 24-pin Control Interface
Características de equipo
Error Signal dry contact for Machine Center (N.O. & N.C.)
MistBLASTER interface receptacle located on electrical enclosure
Dry contact provided for user supplied Transfer Pump control
2 years warrenty
CONTACTO Tel: +49 (0) 611 5101990 Correo electrónico:
  Añadir a favoritos
ChipBLASTER J-30-1
ChipBLASTER J-30-2